Hyundai Santa Fe (DM): Reservoir Tank. Repair procedures - Cooling System - Engine Mechanical SystemHyundai Santa Fe (DM): Reservoir Tank. Repair procedures

Removal and Installation

1.
Remove the over flow hose(A).
2.
Remove the reservoir tank(B).

Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

3.
Install in the reverse order of removal.

Cooling Fan. Repair procedures
Removal and Installation Cooling Fan Assembly 1. Disconnect the battery terminals. 2. Remove the air cleaner assembly. 3. Remove the under cover. 4. Remove the front bumper cover.   5. Disconnect ...

Water Temperature Control Assembly. Components and Components Location
Components 1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant hose ...

See also:

Specifications
Specifications Description Specifications Limit General Type In-line, DOHC   Number of cylinders 4   Bore 88.5 mm (3.484 in.)   Stroke 101.5 mm (3.996 in.)   Total displacement 2497 cc (152.38 ...

Rear Seat Cushion Cover. Repair procedures
Replacement [Second row seat assembly] (LH) • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related ...

Turn signals when towing a trailer
When you tow a trailer, your vehicle has to have a different turn signal flasher and extra wiring. The green arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly ...