Hyundai Santa Fe (DM): Seat Belt Buckle Switch (BS). Description and Operation - SRSCM - RestraintHyundai Santa Fe (DM): Seat Belt Buckle Switch (BS). Description and Operation

Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS). Description and Operation

Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Side Impact Sensor (SIS). Repair procedures
Removal Pressure Side Impact Sensor (P-SIS) • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connector(s), ...

Seat Belt Buckle Switch (BS). Components and Components Location
Components ...

See also:

Repair procedures
Inspection 1. Remove the cowl top cover. 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals of deicer lines. 4. Turn the ignition ...

Battery recharging
Your vehicle has a maintenance-free, calcium-based battery. If the battery becomes discharged in a short time (because, for example, the headlights or interior lights were left on while the vehicle was ...

Parking Assist Sensor. Components and Components Location
Component ...