Hyundai Santa Fe (DM): Seat Belt Buckle Switch (BS). Repair procedures - SRSCM - RestraintHyundai Santa Fe (DM): Seat Belt Buckle Switch (BS). Repair procedures

Removal

1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
3.
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch (A).


Installation

Be sure to install the harness wires so they will not pinch or interfere with other parts.
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
3.
Install the seat belt buckle switch.

Tightening torque:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb-ft)

4.
Install the front seat assembly.
5.
Reconnect the battery negative cable.
6.
After installing the seat belt buckle switch, confirm proper system operation:
A.
Turn the ignition switch ON; the SRS indicator should be turned on for about six seconds and then go off.

Passive Occupant Detection System (PODS-F). Description and Operation
Description In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger presences status ...

See also:

Specifications
Specification Item Specification Power source 3V Operating temperature -20°C ~ +60°C (-4°F ~ +140°F) RF Modulation FSK LF Modulation ASK RF frequency 315MHz Battery CR2032 Transmissible distance 30m ...

Description and Operation
Description Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the ...

Description and Operation
Description Mobile Telemetics System (MTS) Hyundai motor companies are now faced with the task of shifting their paradigm from vehicle-centered services to customer valuecentered services, with the ultimate ...