Hyundai Santa Fe (DM): Service Mode - LCD display - Features of your vehicleHyundai Santa Fe (DM): Service Mode

Service Interval

Service in

Service in

It calculates and displays when you need a scheduled maintenance service (mileage or days).

If the remaining mileage or time reaches 900 mi. (1,500 km) or 30 days, "Service in" message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.

Service required

Service required

If you do not have your vehicle serviced according to the already inputted service interval, “Service required” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position (The mileage and time changes to "---").

To reset the service interval to the mileage and days you inputted before:

- Press the SELECT/RESET button for more than 1 second.

Service in OFF

Service in OFF

If the service interval is not set, “Service in OFF” message is displayed on the LCD display.

✽ NOTICE

If any of the following conditions occurs, the mileage and days may be incorrect.

- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.

LCD Modes
❈ For controlling the LCD modes, refer to "LCD Display Control" in this chapter. ❈ For "Trip Computer" mode, refer to "Trip Computer" in this chapter. ...

User Settings Mode
Description On this mode, you can change setting of the doors, lamps, and so on. Door Auto Door Lock (if equipped) • Off: The auto door lock operation will be deactivated. • Speed: All doors will be ...

See also:

Muffler. Components and Components Location
Components 1.  Front muffler 2.  Catalytic converter 3. Center muffler 4. Main muffler ...

Troubleshooting
Troubleshooting Symptom Suspect Area Remedy (Refer to page) Water leaks from panorama sunroof Deteriorated roof lid weatherstrip Replace Excessive roof lid-to-body clearance and improperly fitted weatherstrip ...

Interior lamp bulb replacement
WARNING Prior to working on the Interior Lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry ...