Hyundai Santa Fe (DM): Shift Cable. Components and Components Location
Components
|
1. Console upper cover 2. Shift lever assembly 3. Shift cable assembly |
4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer |
Shift Lever. Repair procedures
Removal 1. Remove the floor console. 2. Remove the air duct. 3. Disconnect sports mode connector (A). 4. Disconnect the shift cable (A). 5. Remove the shift lever assembly (A) by removing the bolts (C-4ea). ...
Shift Cable. Repair procedures
Removal 1. Remove the floor console. 2. Remove the air duct. 3. Disconnect the shift cable (A). 4. Remove the retainer (A) and nut (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8~8.7 lb-ft) ...
See also:
CVVT & Camshaft. Components and Components Location
Components 1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Exhaust camshaft upper bearing 8. Intake camshaft ...
Illuminated ignition switch
Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition ...
Rear Bumper Cover. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
