Hyundai Santa Fe (DM): Side Impact Sensor (SIS). Description and Operation
Description
Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor
(P-SIS) which are installed at each center of the front door module (LH and
RH) and two SIS which are installed at each center pillar nearby (LH and RH)
and two rear SIS which are installed in the rear pillar (LH and RH).
Pressure Side Impact Sensor is also called P-SIS because it detects pressure
due to collision at its mounting location.
Side Impact Sensor is also called A-SIS because it detects acceleration.
SRSCM decides deployment of the airbag and the time of deployment through
the collision signal of the SIS when the collision occurred.
Front Impact Sensor (FIS). Repair procedures
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag ...
Side Impact Sensor (SIS). Components and Components Location
Components ...
See also:
Lift And Support Points
Lift And Support Points When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additional weight in the luggage area before hoisting. When ...
Output Speed Sensor. Specifications
Specifications ▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40~150)) -40~302 Air gap(mm)in. (0.25~0.70) 0.0098~0.0276 Output voltage (V) High 1.18~1.68 Low 0.59~0.84 ...
Front Wheel Guard. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
