Hyundai Santa Fe (DM): Smart Key. Repair procedures
Smart Key
Smart Key Code Saving
| 1. |
Connect the DLC cable of GDS to the data link connector
(16 pins) in driver side crash pad lower panel, turn the power on GDS.
|
| 2. |
Select the vehicle model and then do "Smart key code
saving".
|
| 3. |
After selecting "Smart key teaching" menu, push "Enter"
key, then the screen will be shown as below.
|
| 4. |
After having the teaching smart key, push "ENTER"
key.
|
| 5. |
Input the "Pin code" for first key teaching.
|
| 6. |
Press the SSB with smart key within 5 sec after pressing
"OK".
|
| 7. |
Confirm the message "First key teaching completed".
|
| 8. |
Press the SSB with smart key within 5 sec after pressing
"OK".
|
| 9. |
Confirm the message "Second key teaching completed".
|
| 10. |
Then the screen will be shown as below when key teaching
process is completed.
|
Description and Operation
Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed. The ...
Smart Key Unit. Components and
Components Location
Components (1) Connector Pin Information No. Connector A Connector B Connector C 1 V_BAT load C_CAN Low SSB illumination ground 2 - C_CAN High - 3 Power ground1 - SSB LED OFF 4 IGN1 - Interior antenna ...
See also:
Rear Disc Brake. Components and Components Location
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...
Welcome system
Headlamp welcome When the headlight(light switch in the headlight or AUTO position) is on and all doors (and tailgate) are locked and closed, the headlight, position light and tail light will come on for ...
Seat Belt Buckle Switch (BS). Components and Components Location
Components ...
