Hyundai Santa Fe (DM): SRSCM
- SRS Control Module (SRSCM). Description and Operation
- SRS Control Module (SRSCM). Components and Components Location
- SRS Control Module (SRSCM). Repair procedures
- Front Impact Sensor (FIS). Description and Operation
- Front Impact Sensor (FIS). Components and Components Location
- Front Impact Sensor (FIS). Repair procedures
- Side Impact Sensor (SIS). Description and Operation
- Side Impact Sensor (SIS). Components and Components Location
- Side Impact Sensor (SIS). Repair procedures
- Seat Belt Buckle Switch (BS). Description and Operation
- Seat Belt Buckle Switch (BS). Components and Components Location
- Seat Belt Buckle Switch (BS). Repair procedures
- Passive Occupant Detection System (PODS-F). Description and Operation
- Passive Occupant Detection System (PODS-F). Components and Components Location
- Passive Occupant Detection System (PODS-F). Repair procedures
- Schematic Diagrams
Components and Components Location
Components 1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Passenger Airbag (PAB) 5. Side Airbag (SAB) 6. Curtain Airbag (CAB) 7. Knee Airbag (KAB) 8. Seat Belt Pretensioner (BPT) 9. Front ...SRS Control Module (SRSCM). Description and Operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...See also:
Cooling Fan. Description and Operation
Description Control the cooling motor voltage in according to the duty(300Hz) of ECM. [ECU → PWM Input Signal(SI : 300Hz)] SI Duty Motor Voltage (V) 10% 0 ─ 30% 4.1 В± 0.65 60% 8.2 ...
Rear Assist Arm. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...
Wheel. Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) When using an impact gun, final tightening torque should be checked using ...