Hyundai Santa Fe (DM): Starter. Description and Operation
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
https://snzmomentum.ru сетевой фильтр lc сетевои фильтр.
Troubleshooting
Troubleshooting • The battery must be in good condition and fully charged for this troubleshooting. ...
Starter. Specifications
Specification Starter Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth 11 Performance [No-load, 11 V] Ampere Max. 70 A Speed Min. 2,400 rpm ...
See also:
Description and Operation
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC current ...
Condition and operation in the front passenger occupant classification system
*1) The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. ...
Fuel Tank Pressure Sensor (FTPS). Schematic Diagrams
Circuit Diagram ...
