Hyundai Santa Fe (DM): Steering Angle Sensor. Description and Operation - ESC(Electronic Stability Control) System - Brake SystemHyundai Santa Fe (DM): Steering Angle Sensor. Description and Operation

Description

The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from the SAS when performing ESC-related calculations.
Components (Steering Angle Sensor, Torque Sensor, Failsafe relay, etc.) of the EPS system are located inside the steering column & EPS unit assembly and the steering column. EPS unit assembly must not be disassemble to be inspected. They must be replaced. (Refer to “ST (Steering system) Gr.”)

Грунтовка гф 021 серая грунт текс 021 МИК-Изол.
DBC Switch. Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...

See also:

Rail Pressure Sensor (RPS). Specifications
Specification ...

Emergency towing precautions
Turn the ignition switch to ACC so the steering wheel isn’t locked. Place the transaxle shift lever in N (Neutral). Release the parking bake. Press the brake pedal with more force than normal since ...

Air Ventilation Seat. Description and Operation
Description The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...