Hyundai Santa Fe (DM): Tail Gate Back Panel. Repair procedures - Tail Gate - Body (Interior and Exterior)Hyundai Santa Fe (DM): Tail Gate Back Panel. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
2.
Disconnect the license lamp connector and back view camera connector (A).
3.
Loosen the tail gate back panel mounting nuts (A).
[Side]

[Center]
4.
Using a screwdriver or remover, remove the tail gate back panel (A).
5.
Install in the reverse order of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.

Tail Gate Back Panel. Components and Components Location
Component Location 1. Tail gate back panel ...

Tail Gate Lift. Repair procedures
Replacement • Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. 1. Using a screwdriver (A), lift up ...

See also:

ICM (Integrated Circuit Module) Relay Box. Components and Components Location
Component ...

Components and Components Location
Components Location 1. AVN (A/V & Navigation head unit) 2. Tweeter speaker 3. External amplifier 4. Roof antenna (GPS) 5. Front door speaker 6. Rear door speaker 7. Subwoofer speaker 8. Antenna feeder ...

Instrument Cluster. Components and Components Location
Components Connector Pin Information No. Description No. Description 1 - 21 - 2 Illumination output 22 - 3 Rheostat down switch 23 4P output 4 Rheostat up switch 24 Immobilizer 5 AT N output 25 AT S output ...