Hyundai Santa Fe (DM): Tail Gate Lift. Repair procedures
Replacement
|
1. |
Using a screwdriver (A), lift up slightly the socket clips (B)
of both ends on the lifter (D), and then remove the lifter from the
bracket (C).
Легендарное фисташковое дерево fortunagreen.ru.
|
2. |
Push the socket of the lifter into the bracket for installation.
|
Tail Gate Back Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...Tail Gate Weatherstrip. Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A). • Do not apply sealant to the body. 2. Install in the reverse order of removal. • Install the weatherstrip aligned with canter line (B). ...See also:
Warning and indicator lights
Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Seat belt warning light. Air bag warning light. ...
Rear Spoiler. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. ...