Hyundai Santa Fe (DM): Tail Gate Trim. Repair procedures - Tail Gate - Body (Interior and Exterior)Hyundai Santa Fe (DM): Tail Gate Trim. Repair procedures

Replacement

[Tail gate trim]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate inside handle caps (A).

2.
After loosening the mounting bolts, then remove the tail gate inside handle (A).

3.
After loosening the mounting screws and clips, then remove the tail gate trim (A).

4.
Install in the reverse order of removal.
•
Replace any damaged clips.
[Tail gate upper trim]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the tail gate upper trim (A).

2.
Install in the reverse order of removal.
•
Replace any damaged clips.
[Tail gate side trim]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
2.
Remove the tail gate upper trim.]
3.
After loosening the mounting screw, then remove the tail gate side trim (A).

4.
Install in the reverse order of removal.
•
Replace any damaged clips.

Tail Gate Trim. Components and Components Location
Component Location 1. Tail gate trim ...

Tail Gate Latch. Components and Components Location
Component Location 1. Tail gate latch assembly ...

See also:

Before starting
Close and lock all doors. Position the seat so that all controls are easily reached. Adjust the inside and outside rearview mirrors. Be sure that all lights work. Check all gauges. Check the operation ...

Air ventilation seat
The Air ventilation seat is provided to cool the front seats during hot weather by blowing air through small vent holes on the surface of the seats. While the engine is running, press the cooling portion ...

Muffler. Repair procedures
Removal and Installation 1. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) 2. Remove the center muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ...