Hyundai Santa Fe: Tail Gate Weatherstrip. Repair procedures - Tail Gate - Body (Interior and Exterior)Hyundai Santa Fe: Tail Gate Weatherstrip. Repair procedures

Replacement

1.
Remove the tail gate weatherstrip (A).
•
Do not apply sealant to the body.

2.
Install in the reverse order of removal.
•
Install the weatherstrip aligned with canter line (B).

Tail Gate Lift. Repair procedures
Replacement • Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. 1. Using a screwdriver (A), lift up ...

Fuel Filler Door
...

See also:

AUX(Auxiliary) Jack. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the console front complete assembly (A). 3. Remove the multimedia jack (B) after disconnecting the connector (A) from the console front ...

BJ Boot. Repair procedures
Removal 1. Remove the front driveshaft. 2. Remove the TJ joint assembly. 3. Remove the Dynamic damper. 4. Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A). 5. Remove the BJ boot. ...

Direct Electro Hydraulic Actuator Coupling. Repair procedures
Inspection All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid is therefore not necessary (zero maintenance, ...