Hyundai Santa Fe (DM): Telemetics Unit (TMU). Repair procedures
Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
|
3. |
Disconnect the cables and connector (A) from the
MTS unit.
[Audio type]
[AVN type]
|
4. |
Remove the MTS unit after loosening the nuts(2EA)
and a bolt.
|
Installation
1. |
Connect the connector and cables.
|
2. |
Install the MTS unit.
|
3. |
Install the glove box housing.
|
4. |
Connect the negative (-) battery terminal.
|
Inspection
1. |
After replacing the TMU, connect to "call center"
by pushing the Blue Link button.
|
2. |
If Blue Link service connected successfully, and
then technician can hear the "Welcome to Hyundai Bluelink" sound.
|
Telemetics Unit (TMU). Components and Components Location
Component Connector Pin Information [Audio type] No. Description No. Description 1 Ground 17 - 2 Ground 18 Battery 1 3 - 19 IGN 1 4 Keypad ground 20 ACC 5 MIC output - 21 Airbag 6 MIC output + 22 Keypad ...BlueLink Control Switch. Components and Components Location
Components ...See also:
Temperature control
The temperature control switch allows you to control the temperature of the airflow in the vehicle. To change the temperature: Press the (red) switch to increase temperature. Press the (blue) switch to ...
Side Airbag (SAB) Module. Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the front seat assembly. 3. Remove the seat back assembly. The side airbag cannot be disassembled ...
Checking the coolant level
Removing radiator cap Never attempt to remove the radiator cap while the engine is operating or hot. Doing so might lead to cooling system and engine damage and could result in serious personal injury ...