Hyundai Santa Fe (DM): To defrost outside windshield - Automatic climate control system - Windshield defrosting and defogging - Features of your vehicleHyundai Santa Fe (DM): To defrost outside windshield

1. Set the temperature to the extreme hot (HI) position.

1. Set the temperature to the extreme hot (HI) position.
2. Set the fan speed to the highest (extreme right) position.
3. Press the defrost button (4. The outside (fresh) air position will be selected automatically.).
4. The outside (fresh) air position will be selected automatically.

If the fan speed is adjusted to a higher fan speed. position is selected, lower fan speed is adjusted to a higher fan speed.

To defog inside windshield
1. Select desired temperature. 2. Select desired fan speed. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected automatically. If the outside (fresh) air position is not ...

Auto defogging system
Auto defogging reduces the probability of fogging up the inside of the windshield by automatically sensing the moisture of inside the windshield. The auto defogging system operates when the heater or ...

See also:

Transaxle Control Module (TCM). Description and Operation
Description Transaxle Control Module (TCM) is the automatic transaxle's brain. The module receives and processes signals from various sensors and implements a wide range of transaxle controls to ensure ...

Oil Cooler. Repair procedures
Removal 1. Loosen the drain plug, and drain the coolant. Remove the radiator cap to help drain the coolant faster. 2. Disconnect the oil cooler coolant hoses (A). 3. Remove the oil filter (A). 4. Loosen ...

Rheostat. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side cover. 3. Remove the lower crash pad switch assembly (A) after loosening the screws (3EA). 4. Remove the rheostat ...