Hyundai Santa Fe (DM): TPMS Receiver. Repair procedures
Adjustment
| 1. |
Disconnect the negative (-) battery cable.
|
| 2. |
Remove the glove box housing.
|
| 3. |
Disconnect the connector.
|
| 4. |
Remove the bracket (B) and receiver (C) as loosen the nut (A-1ea).
|
| 5. |
Install in the reverse order of removal.
|
| 6. |
Re-connect battery and turn Ignition on.
|
| 7. |
After replacing the receiver, learn by using self-diagnosis device(GDS).
|
[Wheel Sensor ID Writing (Wireless) initialization]
[Wheel Sensor ID Writing (Wireless) 1]
[Wheel Sensor ID Writing (Wireless) 2]
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
| 1. |
Connect self-diagnosis connector(16pins) located in the lower
of driver side crash pad to self-diagnosis device, and then turn the
self-diagnosis device after key is ON.
|
| 2. |
Select the "vehicle model" and "TPMS" on GDS vehicle selection
screen, then select OK.
|
[Vehicle name input initialization]
[Vehicle Name Writing 1]
[Vehicle Name Writing 2]
[Vehicle Name Writing 3]
[VIN input initialization]
[VIN Writing 1]
[VIN Writing 2]
[VIN Writing 3]
