Hyundai Santa Fe (DM): TPMS Receiver. Schematic Diagrams
System Circuit Diagram
|
No |
Function |
|
1 |
MCU part |
|
2 |
CAN interface part |
|
3 |
5V supply part |
|
4 |
Battery detection circuit part |
|
5 |
RF receiver part |
|
6 |
Antenna part |
TPMS Receiver. Description and Operation
Description It search automatically sensor location and learn the new sensor. To check defect of system or vehicle, use the sensor information, distance, indistinct noise, automatic learning status, vehicle ...
TPMS Receiver. Repair procedures
Adjustment 1. Disconnect the negative (-) battery cable. 2. Remove the glove box housing. 3. Disconnect the connector. 4. Remove the bracket (B) and receiver (C) as loosen the nut (A-1ea). Tightening torque ...
See also:
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back for low beams. The high beam indicator will light when the headlight high beams are switched on. To prevent the battery ...
Canister Close Valve (CCV). Description and Operation
Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system ...
Front Oil Seal. Repair procedures
Removal and Installation 1. Remove the crankshaft damper pulley. 2. Remove the front oil seal(A). 3. Install the crankshaft front oil seal (A) using SST (09214-3K000, 09231-H1100) (B). ...
