Hyundai Santa Fe (DM): Troubleshooting - Starting System - Engine Electrical SystemHyundai Santa Fe (DM): Troubleshooting

Troubleshooting

•
The battery must be in good condition and fully charged for this troubleshooting.


Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

Starter. Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

See also:

Tail Gate Latch. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

SRS Control Module (SRSCM). Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. 4. Loosen the bolts ...

Crankshaft Position Sensor (CKPS). Troubleshooting
Wave Form ...