Hyundai Santa Fe (DM): Underdrive Brake Control Solenoid Valve(UD/B_VFS). Repair procedures - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe (DM): Underdrive Brake Control Solenoid Valve(UD/B_VFS). Repair procedures

Inspection

1.
Turn ignition switch OFF.
2.
Remove the air duct.
3.
Disconnect the solenoid valve connector(A).

4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the resistance is within the specification.

Removal

Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pressure will need to be adjusted after replacing the VFS solenoid valve. If replacing the VFS solenoid valve; also replace the valve body assembly.

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description and Operation
Description Overdrive clutch control solenoid valve(OD/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...

See also:

Specifications
Specification Item Specification Power source 3V Operating temperature -20°C ~ +60°C (-4°F ~ +140°F) RF Modulation FSK LF Modulation ASK RF frequency 315MHz Battery CR2032 Transmissible distance 30m ...

SRS Control Module (SRSCM). Components and Components Location
Components ...

Front Door Window Glass. Components and Components Location
Component Location 1. Front door window glass ...