Hyundai Santa Fe (DM): Water Temperature Control Assembly. Repair procedures
Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Loosen the drain plug and drain the engine coolant.
|
| 3. |
Remove the radiator upper hose and lower hose.
|
| 4. |
Disconnect the connectors and then remove the wiring
protector (A).
|
| 5. |
Disconnect the E.T.C cooler hose (A) and the remove
the water temperature control assembly(A).
|
| 6. |
Install in the reverse order of removal.
|
Water Temperature Control Assembly. Components and Components
Location
Components 1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant hose ...
Thermostat. Repair procedures
Removal and Installation Removal of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat. 1. Drain engine ...
See also:
Relay Box (Passenger Compartment). Description and Operation
Description Smart Junction Box(SJB) 1. General function : Interior Junction Box + some functions of BCM It controls loads with CAN communication and IPS. 2. Main function A. Low speed CAN communication(100 ...
Components and components location
Components Location 1. Crankcase pressure regulating valve (PRV) 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank air filter 5. Catalytic converter (WCC) 6. Catalytic converter (UCC) 1. ...
Cruise Indicator Light
This indicator light illuminates: • When the cruise control system is enabled. For more details, refer to “Cruise Control System” in section 5. ...
