Hyundai Santa Fe (DM): Welcome system - Features of your vehicleHyundai Santa Fe (DM): Welcome system

Headlamp welcome

When the headlight(light switch in the headlight or AUTO position) is on and all doors (and tailgate) are locked and closed, the headlight, position light and tail light will come on for 15 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.

At this time, if you press the door lock button (on the transmitter or smart key), the lights will turn off immediately.

Interior light

When the interior light switch is in the DOOR position and all doors (and tailgate) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.
    - When the button of the outside door handle is pressed.

At this time, if you press the door lock button, the lamps will turn off immediately.

Puddle lamp and pocket lamp

When all doors are locked and closed, the puddle lamp and pocket lamp will come on for 15 seconds if any of the below is performed.

  • Without smart key system
    - When the door unlock button is pressed on the transmitter.
  • With the smart key system
    - When the door unlock button is pressed on the smart key.
    - When the button of the outside door handle is pressed.
    - When the vehicle is approached with the smart key in possession.

At this time, if you press the door lock button, the lamps will turn off immediately.

Vanity mirror lamp
Pull the sunvisor downward and you can turn the vanity mirror lamp ON or OFF by pushing the button. : To turn the lamp ON. O : To turn the lamp OFF. CAUTION To prevent unnecessary battery drain, turn ...

Defroster
CAUTION To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ✽ NOTICE If ...

See also:

Air Ventilation Seat. Description and Operation
Description The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...

Auto Light Sensor. Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's ...

General Information. Special Service Tools
Special Service Tools Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-3K000) (09231-H1100) Installation of the front oil seal A : 09214-3K000 (installer) B : 09231-H1100 ...