Hyundai Santa Fe (DM): Windshield Deicer Switch. Repair
procedures
Inspection
| 1. |
The windshield deicer switch inputs can be checked
using the GDS.
|
| 2. |
To check the input value of windshield deicer switch,
select option "Body Control Module".
|
| 3. |
Select option "Current Data".
|
| 4. |
To perform functional test on SJB outputs, select
"Actuation Test".
|
Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the audio unit or the AVN head unit.
|
| 3. |
Remove the heater and A/C controll unit.
|
Installation
| 1. |
Install the heater and A/C control unit.
|
| 2. |
Install the audio unit or the AVN head unit.
|
| 3. |
Connect the negative (-) battery terminal.
|
Repair procedures
Inspection 1. Remove the cowl top cover. 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals of deicer lines. 4. Turn the ignition ...
See also:
Sunvisor. Components and Components Location
Component Location 1. Sunvisor 2. Retainer ...
Side impact air bag
❈ The actual air bags in the vehicle may differ from the illustration. Your vehicle is equipped with a side impact air bag in each front seat. The purpose of the air bag is to provide the vehicle's ...
Front Lower Arm. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...
