Hyundai Santa Fe (DM): Windshield Glass
Drive Belt Tensioner. Repair procedures Parking Brake Pedal Assembly. Repair procedures Rear Door Outside Handle. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Repair procedures
Components 1. Windshield side 2. Windshield glass side bracket [LH] 3. Windshield glass side bracket [LH] 4. Windshield glass upper molding ...
Components and Components LocationSee also:
Removal and Installation 1. Remove the drive belt. 2. Remove the drive belt auto tensioner(A). Tightening torque : 53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft) Tensioner pulley bolt is left-hands ...
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the junction box. 4. Disconnect the parking brake switch connector. 5. ...
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the rear door outside handle cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...
