Hyundai Santa Fe: Antenna. Repair procedures - Audio - Body Electrical SystemHyundai Santa Fe: Antenna. Repair procedures

Inspection

Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable.

3.
Check for continuity between the outer poles of antenna cable. There should be continuity.

4.
If there is no continuity, replace the antenna cable.
5.
Check for continuity between the center pole (A) and outer pole (B) of antenna cable. There should be no continuity.

6.
If there is continuity, replace the antenna cable.

Removal

1.
Remove the rear roof trim.
2.
Disconnect the roof antenna connectors (A) from the roof antenna.

3.
Remove the roof antenna (A) after removing a nut.


Installation

1.
Connect the roof antenna connectors.
2.
Install the rear roof trim.
-
Make sure that the cables and connectors are plugged in properly.
-
Check the audio system.

    Audio Remote Control. Components and Components Location
    Components 1. Remote control switch (LH) 2. Remote control switch (RH) 3. Bluetooth hands free switch 4. Trip switch ...

    See also:

    Specifications
    Specifications Items Specifications Rated voltage DC 12V Operating temperature range -22 ~ +176°F (-30°C ~ +80°C) ...

    Limitation of Active ECO operation
    If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The sys ...

    Transaxle Oil Temperature Sensor. Description and Operation
    Description Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an Negativen Thermal Coefficient(NTC) sensor ...