Hyundai Santa Fe: Automatic-dimming function - Mirrors - Features of your vehicleHyundai Santa Fe: Automatic-dimming function

Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by pushing the ON/OFF Button:

1. Pressing the button turns the autodimming function OFF which is indicated by the green Status Indicator LED turning off.
2. Pressing the button again turns the auto-dimming function ON which is indicated by the green Status Indicator LED turning on.

✽ NOTICE

The mirror defaults to the ON position each time the vehicle is started.

Z-Navâ„¢ Compass Display

The NVSâ„¢ Mirror in your vehicle is also equipped with a Z-Navâ„¢ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.).

Mirrors
Inside rearview mirror Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects ...

Compass function
The Compass can be turned ON and OFF and will remember the last state when the ignition is cycled. To turn the display feature ON/OFF: 1. Press and release the button to turn the display feature OFF. 2. ...

See also:

Rear Seat Belt Buckle. Repair procedures
Replacement [Second row seat belt buckle] • Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B). 1. Place the second ...

Rail Pressure Sensor (RPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Condition Output Voltage (V) Idle  Approx. 1.2 1,500 rpm ...

TJ Joint. Repair procedures
Removal • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be replaced with a new one. 1. Remove the Front Driveshaft. 2. ...