Hyundai Santa Fe: Battery Sensor. Description and Operation - Charging System - Engine Electrical SystemHyundai Santa Fe: Battery Sensor. Description and Operation

Description

Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor (A) is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.


Battery. Troubleshooting
Troubleshooting ...

Battery Sensor. Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation 1. Install in the ...

See also:

CVVT Oil Control Valve (OCV). Schematic Diagrams
Circuit Diagram ...

Front fog lamp bulbs
If the lamp bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer. ...

Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition ...