Hyundai Santa Fe (TM): Engine Mechanical System
Specifications Balance Shaft & Oil Pump. Repair procedures Output Speed Sensor. Repair procedures
General Service Information Protection of the Vehicle Always be sure to cover fenders, seats, and floor areas prior to beginning work. • The support rod must be inserted into the hole near ...
General Service Information
Specifications Description Specifications Limit General Type In-line, DOHC 　 Number of cylinders 4 　 Bore 88.5 mm (3.484 in.) 　 Stroke 101.5 mm (3.996 in.) 　 Total displacement 2497 cc (152.38 ...
SpecificationsSee also:
Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 66 lit. (17.4 U.S.gal., 69.7 U.S.qt., 58.0 Imp.qt.) Fuel Filter Type Paper type Fuel Pressure Low Pressure Fuel Line 480 ~ 520 ...
Removal 1. Remove the timing chain. 2. Install a stopper pin (A) after compressing the balance shaft chain tensioner. 3. Remove the balance shaft chain hydraulic tensioner (B). 4. Remove the balance shaft ...
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. 2. Disconnect ...
