Hyundai Santa Fe: ESC OFF usage - Electronic stability control (ESC) - Brake system - Driving your vehicleHyundai Santa Fe: ESC OFF usage

When driving

  • ESC should be turned on for daily driving whenever possible.
  • To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface.

WARNING

Never press the ESC OFF button while ESC is operating (ESC indicator light blinks).

If ESC is turned off while ESC is operating, the vehicle may slip out of control.

✽ NOTICE

  • When operating the vehicle on a dynamometer, ensure that the ESC is turned off (ESC OFF light illuminated). If the ESC is left on, it may prevent the vehicle speed from increasing, and result in false diagnosis.
  • Turning the ESC off does not affect ABS or brake system operation.
    Indicator light
    When ignition switch is turned to ON, the indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever ESC is operating or illuminat ...

    Vehicle stability management (VSM)
    This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between ...

    See also:

    Components and Components Location
    Components Location 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor ...

    Components and Components Location
    Component Location 1. Slide motor 2. Front height motor 3. Rear height motor 4. Lumbar support motor (Horizontal) 5. Lumbar support motor (Vertical) 6. Recli ...

    Manifold Absolute Pressure Sensor (MAPS). Repair procedures
    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. ...