Hyundai Santa Fe: Intake Air Temperature Sensor (IATS). Specifications - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe: Intake Air Temperature Sensor (IATS). Specifications

Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS). Specifications

Specification

Temperature
 Resistance (kΩ)
°C
 °F
-40
 -40
 40.93 ~ 48.35
-20
 -4
 13.89 ~ 16.03
0
 32
 5.38 ~ 6.09
10
 50
 3.48 ~ 3.90
20
 68
 2.31 ~ 2.57
40
 104
 1.08 ~ 1.21
60
 140
 0.54 ~ 0.62
80
 176
 0.29 ~ 0.34


Intake Air Temperature Sensor (IATS). Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air temperature ...

Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

See also:

DBC Switch. Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...

Components and Components Location
Components 1. Windshield side 2. Windshield glass side bracket [LH] 3. Windshield glass side bracket [LH] 4. Windshield glass upper molding ...

Rear Upper Arm. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...