Hyundai Santa Fe: Parking Brake System
SS-A Solenoid Valve(ON/OFF). Repair procedures Armed stage Rear Bumper beam Assembly. Components and Components Location
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear ...
Rear Disc Brake. Repair procedures
Components (1) 1. Parking brake pedal 2. Equalizer assembly 3. Parking brake cable Components (2) 1. Parking brake pedal assembly 2. Front parking brake cable 3. Equalizer assembly 4. Rear parking brake ...
Components and Components LocationSee also:
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
Using the smart key (if equipped) Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors, the engine hood and tailgate lid are closed ...
Component Location 1. Rear bumper beam assembly ...
