Hyundai Santa Fe (DM): Brake System
Refrigerant label Injector. Repair procedures Turn By Turn Mode
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the locking mechanism (A), using a (-) driver (B) turn it counter clockwise. From ...
Emergency Fastening Device (EFD). Repair proceduresSee also:
The refrigerant label is located at the front of the engine room. ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. ...
This mode displays the state of the navigation. ...
