Hyundai Santa Fe: Specifications - AVN System - Body Electrical SystemHyundai Santa Fe: Specifications

Specifications

Item
Specification
Power source
DC 14.4V (-) ground
Frequency range / Channel space
FM : 87.5 ~ 107.9 MHz / 200 KHz
AM : 530 ~ 1710 KHz / 10 KHz
Tuning type
PLL SYNTHESIZED TUNING
Impedance
2 ohm x 4
Antenna
80 pF 75 ohm
Dark current
MAX 2mA (Head unit only)
S/N
FM : MIN 50 dB
AM : MIN 40 dB

GPS
Item
Specification
Frequency
1.57542 GHz
Sensitivity level
- 144 dbm
Channel
12CH

Speaker
Item
Dimension
Infinity
Input Power (W or V)
Front
20W (Max 40W)
25W (Max 50W)
Rear
20W (Max 40W)
25W (Max 50W)
Front Center
20W (Max 40W)
20W (Max 40W)
Front Tweeter
20W (Max 40W)
13W (Max 25W)
Surround
15W (Max 30W)
25W (Max 50W)
Sub woofer
20W per channel (Max 40W) -2 channels
25W per channel (Max 50W) -2 channels
Speaker Impedance (Ω)
Front
1.8 ± 0.3
2.1 ± 0.3
Rear
1.8 ± 0.3
2.0 ± 0.3
Front Center
2.6 ± 0.4
2.0 ± 0.3
Front Tweeter
4 ± 0.6
4 ± 0.3
Surround
1.8 ± 0.3
1.9 ± 0.3
Sub woofer
2.0 ± 0.3
5.0 ± 0.8
Speaker Number
10
10


Components and Components Location
Components Location 1. AVN (A/V & Navigation head unit) 2. Tweeter speaker 3. External amplifier 4. Roof antenna (GPS) 5. Front door speaker 6. Rear door speaker 7. Subwoofer speaker 8. Antenna feeder ...

See also:

Oil hydraulic Motor(Actuator). Repair procedures
Inspection If you have trouble code related to the oil hydraulic motor (actuator), check oil hydraulic motor (actuator) according to the inspection process. Oil Hydraulic Motor (Actuator) Inspection Procedure ...

Ignition Coil. Repair procedures
Removal 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). • When removing the ignition coil connector, pull the lock pin (A) and ...

Transaxle Control Module (TCM). Repair procedures
Removal When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used TCM] 1. Perform "TCM Neutral mode" procedure with ...