Hyundai Santa Fe (DM): Air ventilation seat - Front seat adjustment - Power - Seats - Safety features of your vehicleHyundai Santa Fe (DM): Air ventilation seat

The Air ventilation seat is provided to cool the front seats during hot weather

The Air ventilation seat is provided to cool the front seats during hot weather by blowing air through small vent holes on the surface of the seats. While the engine is running, press the cooling portion (blue color) of the switch to cool the driver's seat or the front passenger's seat.

When the operation of the seat cooler is not needed, keep the switches in the OFF position.

  • Each time you press the button, the airflow will change as follows:
    The Air ventilation seat defaults to the OFF position whenever the ignition
  • The Air ventilation seat defaults to the OFF position whenever the ignition switch is turned on.
Seat warmer
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passenger's ...

Seatback pocket
WARNING - Seatback pockets Do not put heavy or sharp objects in the seatback pocket. An occupant could contact such objects in a crash. Heavy objects in the front passenger seatback could also interfere ...

See also:

Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. ...

Components and Components Location
Component Location 1. Rear wiper arm & blade 2. Tailgate glass hole 3. Grommet 4. Rear wiper arm nut 5. Rear wiper motor assembly 6. Head cap 7. Rear wiper motor bolt ...

Power Door Lock Switch. Repair procedures
Diagnosis With GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of power ...