Hyundai Santa Fe: BlueLink Control Switch. Repair procedures - MTS System - Body Electrical SystemHyundai Santa Fe: BlueLink Control Switch. Repair procedures

Removal

1.
Remove the Electro chromic Inside rear view mirror.

Installation

1.
Install the Electro chromic Inside rear view mirror.

See also:

Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition ...

Loss of the smart key
A maximum of 2 smart keys can be registered to a single vehicle. If you happen to lose your smart key, you will not be able to start the engine. You should immediately take the vehicle and remaining key ...

Front Strut Assembly. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...