Hyundai Santa Fe: Special Service Tools - General Information - Engine Control/Fuel SystemHyundai Santa Fe: Special Service Tools

Special Service Tools

Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)

Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)

Connection between the high pressure fuel pump and the fuel feed line
Heated Oxygen Sensor Socket Wrench
(09392-2H100)

Removal and installation of the heated oxygen sensor
Heated Oxygen Sensor Socket Wrenc
(09392-1Y100)

Removal and installation of the heated oxygen sensor
Torque Wrench Socket
(09314-3Q100)

Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool
(09353-2B000)

Installation of the injector combustion seal


Specifications
Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 66 lit. (17.4 U.S.gal., 69.7 U.S.qt., 58.0 Imp.qt.) Fuel Filter Type Paper type Fuel Pressure Low Pressure Fuel Line 480 ~ 520 ...

Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature ...

See also:

Water Temperature Control Assembly. Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the drain plug and drain the engine coolant. 3. Remove the radiator upper hose and lower hose. 4. Disconnect the connectors and then remove ...

Power Seat Motor. Repair procedures
Inspection Power Seat Motor 1. Disconnect the connectors for each motor. A : Slide motor B : Front height motor C : Rear height motor D : Lumbar support motor (Horizontal) E : Lumbar support motor (Vertical) ...

Seat Belt Pretensioner (BPT). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Left side - Remove the seat belt lower anchor cover (A). After loosening the mounting bolt, ...