Hyundai Santa Fe (TM): Components and components location - Emission Control SystemHyundai Santa Fe (TM): Components and components location

Components Location

1. Crankcase pressure regulating valve (PRV)
2. Canister
3. Purge control solenoid valve (PCSV)
4. Fuel tank air filter
5. Catalytic converter (WCC)
6. Catalytic converter (UCC)

1. Crankcase Pressure Regulating Valve (PRV)
2. Canister

3. Purge control solenoid valve (PCSV)
4. Fuel tank air filter

5. Catalytic converter (WCC)
6. Catalytic converter (UCC)


Description and operation
Description Emissions Control System consists of three major systems. • The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into ...

Troubleshooting
Troubleshooting Symptom Suspect area Engine will not start or hard to start Vapor hose damaged or disconnected Engine struggles to start Malfunction of the Purge Control Solenoid Valve Rough idle or engine ...

See also:

Filler-Neck Assembly. Repair procedures
Removal 1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation tube quick-connector ( B). 4. Open the fuel filler door and unfasten the filler-neck assembly mounting ...

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling the fuel filler lid opener lever located on the driver’s door. ✽ NOTICE If the fuel filler lid will not open because ice ...

Hazard Lamp Switch. Repair procedures
Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch ...