Hyundai Santa Fe (DM): Engine Cover. Repair procedures
Removal and Installation
| 1. |
Remove the engine cover (A).
|
| 2. |
Install in the reverse order of removal.
|
Engine Room Under Cover. Components and
Components Location
Components 1. Under Cover 2. Side Cover (RH) 3. Side Cover (LH) ...
See also:
Repair procedures
Adjustment Inspect Glass Alignment 1. Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it. Alignment adjustment Standard value [mm(in.)] ...
Idle Stop and Go (ISG)
Idle Stop and Go helps reduce fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill (for example, red stop light, stop sign, and traffic jam) subject to certain ...
Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...
