Hyundai Santa Fe: ESC OFF Switch. Description and Operation - ESC(Electronic Stability Control) System - Brake SystemHyundai Santa Fe: ESC OFF Switch. Description and Operation

Description

1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.

Yaw-rate and G Sensor. Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. 4. Loosen the bolts ...

ESC OFF Switch. Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...

See also:

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ▷ Type: Piezo-Resistive ...

Headlamp (HID type), position (LED), turn signal, and front fog lamp bulb replacement
If the lamp bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer. WARNING - HID Headlamp low beam Do not attempt to replace or inspect the low beam (XENON bulb) due to electric ...

Fuel Line. Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) ...