Hyundai Santa Fe (DM): Front Hub / Knuckle / Tone Wheel. Components and Components Location - Front Axle Assembly - Driveshaft and axleHyundai Santa Fe (DM): Front Hub / Knuckle / Tone Wheel. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel. Components and Components Location

Components

1. Knuckle
2. Dust cover
 3. Hub assembly
4. Brake disc


Front Axle Assembly
...

Front Hub / Knuckle / Tone Wheel. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

See also:

Repair procedures
Fuel Pressure Test 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) When removing the fuel pump relay, a Diagnostic Trouble ...

Checking the engine oil level
Type A Type B 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for ...

Height Adjust. Repair procedures
Replacement 1. Remove the front seat belt upper anchor. 2. After loosening the mounting bolts, then remove the height adjust (A). Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...