Hyundai Santa Fe (TM): General Information
Heated Repair procedures Anti-lock Brake System (ABS) Warning Light Input Speed Sensor. Repair procedures
Service manual for Fourth generation (TM) Hyundai Santa Fe. The 2019 Hyundai Santa Fe line-up offers a choice of three proven powertrains. There is a 2.4-liter inline four-cylinder GDI engine with 185 ...
Hyundai Santa Fe TM 2019-2023 Service Manual
Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.m, Ib-ft) Nominal diameter. (mm) Pitch [mm (in.) ] 4T 8T 10T M5 0.8 (0.031) ...
General Tightening Torque TableSee also:
Inpection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ Â± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω Â± 10% 2. Measure ...
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction ...
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. 2. Disconnect ...
