Hyundai Santa Fe: Hands Free Mic. Repair procedures
Inspection
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Seperate the handsfree mic (A) from the roof trim.
|
| 3. |
Remove the handsfree mic (B) after disconnecting
the handsfree mic connector (A).
|
| 4. |
Check the continuity of Mic between terminals.
|
Hands Free Switch. Repair procedures
Inspection 1. Check for resistance between terminals in each switch position. [Bluetooth] Switch Connector terminal Resistance (± 5%) End 2-5 12.1 kΩ Send 2-5 34.1 kΩ [Bluetooth + Voice] Switch ...
Troubleshooting
Troubleshooting Problem Possible cause Solution Not pairing Bluetooth device of Car is not discoverable mode Enter Bluetooth pairing (searching) mode User’s phone is Bluetooth off mode User’s phone ...
See also:
Repair procedures
Operation and Leakage Check Check all of the following items: Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive. If the brakes do not work properly, ...
Starter. Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...
ICM (Integrated Circuit Module)
Relay Box. Repair procedures
Inspection Rear Blower Motor relay Check for continuity between the terminals. 1. There should be continuity between the No.16 and No.15 terminals when power and ground are connected to the No.13 and No.14 ...
