Hyundai Santa Fe (DM): Manifold Absolute Pressure Sensor (MAPS). Specifications - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe (DM): Manifold Absolute Pressure Sensor (MAPS). Specifications

Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Control/Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS). Specifications

Specification

Pressure
[kPa (kgf/cm², psi)]
 Output Voltage (V)
20.0 (0.20, 2.9)
 0.79
46.7 (0.47, 6.77)
 1.84
101.3 (1.03, 14.7)
 4.0


Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional ...

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...

See also:

Transaxle Shift Indicator
Automatic Transaxle Shift Indicator This indicator displays which automatic transaxle shift lever is selected. • Park :P • Reverse : R • Neutral : N • Drive :D • Sports Mode : 1, 2, 3, 4, 5, ...

Drive Belt. Repair procedures
Removal and Installation 1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) ...

Troubleshooting
Failure Diagnosis 1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is prohibited. 3. However, when the solenoid valve ...