Hyundai Santa Fe: MAX A/C-Level (B, D)
To operate the MAX A/C, turn the fan speed control knob to the right to maximum fan speed, then press the MAX A/C button. Air flow is directed toward the upper body and face.
In this mode, the air conditioning, the recirculated air position and max cool temperature will be selected automatically.
Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel.
Also, you can adjust the direction of air delivered from these vents using the vent control lever as shown.
Mode selection
The mode selection button controls the direction of the air flow through the ventilation system. Face-Level (B, D, F) Air flow is directed toward the upper body and face. Additionally, each outlet can ...
Temperature control
The temperature control switch allows you to control the temperature of the airflow in the vehicle. To change the temperature: Press the (red) switch to increase temperature. Press the (blue) switch to ...
See also:
Repair procedures
Replacement • Be careful not to damage the fender and body. • When removing the clips, use a clip remover. 1. Remove the head lamps. 2. Remove the side sill molding. 3. Loosen the front wheel guard ...
Repair procedures
Inspection 1. Remove the cowl top cover. 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals of deicer lines. 4. Turn the ignition ...
Front Door Belt Inside Weatherstrip. Repair procedures
Replacement 1. Remove the front door trim. 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips. ...
