Hyundai Santa Fe: Output Speed Sensor. Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe: Output Speed Sensor. Specifications

Specifications

▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40~150)) -40~302
Air gap(mm)in.
(0.25~0.70) 0.0098~0.0276
Output voltage (V)
High
1.18~1.68
Low
0.59~0.84


Output Speed Sensor. Description and Operation
Description The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module(TCM). ...

Output Speed Sensor. Schematic Diagrams
Circuit Diagram ...

See also:

Center console storage
To open the center console storage, pull up the lever. ...

Hood Insulator Pad. Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A). • Be careful not to scratch the hood panel. 2. Install in the reverse order of removal. • Replace any damaged ...

Transaxle Oil Temperature Sensor. Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...