Hyundai Santa Fe (DM): Schematic Diagrams
System Block Diagram
Component part |
Function |
|
Vehicle-speed sensor |
Converts vehicle speed to pulse. |
|
ECM |
Receives signals from sensor and control switches. |
|
Cruise control indicator |
Illuminate when CRUISE switch is ON (Built into cluster) |
|
Cruise Control switches |
ON/OFF switch |
Switch for automatic speed control power supply. |
RES+ switch |
Controls automatic speed control functions by Resume/Accel switch
(Set/Coast switch) |
|
SET- switch |
||
Cancel switches |
Cancel switch |
Sends cancel signals to ECM. |
Brake-pedal switch |
||
Transaxle range switch (A/T) |
||
ETC motor |
Regulates the throttle valve to the set opening by ECM. |
Description and Operation
Cruise Control The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and ...
See also:
Jack and tools
The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to find these equipment. (1) Jack handle (2) Jack (3) Wheel lug nut wrench (4) Socket ...
Camshaft Position Sensor (CMPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal • DON’T remove the camshaft position sensor while the engine is running or ...
ETC (Electronic Throttle Control) System. Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator ...