Hyundai Santa Fe: Muffler. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Santa Fe: Muffler. Repair procedures

Removal and Installation

1.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.
Remove the center muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Remove the main muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.
Install in the reverse order of removal.
When installing, replace with new gaskets.

Muffler. Components and Components Location
Components 1.  Front muffler 2.  Catalytic converter 3. Center muffler 4. Main muffler ...

Engine Electrical System
...

See also:

Do not install a child restraint on the front passenger’s seat.
Never place a rear-facing child restraint in the front passenger’s seat. If the air bag deploys, it would impact the rear-facing child restraint, causing serious or fatal injury. In addition, do not ...

Floor mat anchor(s)
When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward. WARNING The floor mat must be properly ...

Pressure Sensor. Schematic Diagrams
Circuit Diagram ...