Hyundai Santa Fe: Specifications - General Information - Emission Control SystemHyundai Santa Fe: Specifications

Specifications

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.0 ~ 22.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure
[kPa (kgf/cm², in H2O)
Output Voltage (V)
-3.75 (-0.038, -15.05)
4.5
0
1.5
+1.25 (0.013, 5.02)
0.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.8 ~ 21.8 [20°C(68°F)]


Tightening Torques

Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) Valve installation
0.19 ~ 0.29
1.9 ~ 2.8
1.4 ~ 2.1


Description and Operation
Description Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the ...

Troubleshooting
Troubleshooting Symptom Suspect area Engine will not start or stuggle to start Vapor hose damaged or disconnected Engine stuggle to start Malfunction of the Purge Control Solenoid Valve Rough idle or engine ...

See also:

Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

Starter. Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

Power Door Mirror Actuator. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (B) after removing the front door quadrant cover (A). 3. Disconnect the power door mirror connector (A) from the ...