Hyundai Santa Fe: Emission Control System
- General Information
- Description and Operation
- Specifications
- Troubleshooting
- Schematic Diagrams
- Components and Components Location
- Crankcase Emission Control System
- Schematic Diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve. Description and Operation
- Positive Crankcase Ventilation (PCV) Valve. Repair procedures
- Evaporative Emission Control System
- Description and Operation
- Schematic Diagrams
- Components and Components Location
- Repair procedures
- Canister. Repair procedures
- Fuel Filler Cap. Description and Operation
- Fuel Tank Air Filter. Repair procedures
- Exhaust Emission Control System
Cruise Control Switch. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. <a href="content.asp?vehicletype=Passenger&mfrcode=HY&area=HMA&langcode=ENG&modelid=AN13&modelyr=2013&mmctype=ab&mmcid=36&group=SHOP&pdftype=&cat1=2013+%3E+G+2%2E0+T%2DGDI&ec=&nLocation=1$2_1_3_1&firstnodedesc=Restraint&sitinfolist=81%5E8120%5E81200100%5Enone%5E801%5E1%5EENG%5EHY%5EAN13%5E2013%5Eab%5E36%5Enone%5Enone%5Enone%5ESHOP%5E%2481%5E8120%5E81200100%5Enone%5E801%5E4%5EENG%5EHY%5EAN13%5E2013%5Eab%5E36%5Enone%5Enone%5Enone%5ESHOP%5E%2481%5E8120%5E81200100%5Enone%5E801%5E8%5EENG%5EHY%5EAN13%5E2013%5Eab%5E36%5Enone%5Enone%5Enone%5ESHOP%5E%24" ...
See also:
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km). ...
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. As explained earlier in this section, several procedures ...
Mirrors
Inside rearview mirror Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects ...

