Hyundai Santa Fe (TM): Specifications - Engine Electrical SystemHyundai Santa Fe (TM): Specifications

Service Data
Ignition System
Ignition Coil
Item
Specification
Rated Voltage (V)
13.5V
Secondary Coil [Engine 1000RPM standard]
Input voltage (V)
13.5V
Dwell Time (ms)
4.0 - 4.6
Spark current (mA)
Min. 90
Spark duration time (ms)
Min. 2.0
Igniter voltage (V)
400 - 500
Pin
4

Item
Specification
Engine Speed (RPM)
1000
2000
3000
4000
5000
6000
7000
Dwell Time (ms)
4.7
4.7
4.1
3.4
3.1
2.8
2.7
Secondary Coil Voltage (kV)
41
41
41
40
38
36
35

Spark plug
Item
Specification
Type
SILZKR7K11S
SILZKR8J9GS
Gap
1.0 - 1.1 mm
(0.0394 - 0.0433 in.)
0.8 - 0.9 mm
(0.0315 - 0.0354in.)
Electrode Material
IRIDIUM

Charging System
Alternator
Item
Specification
Rated voltage
13.5V , 130A
Speed in use
1,000 - 18,000rpm
Pin
1 (LIN)
Pulley Type
OAP pulley

Battery
▷ CMF68L-DIN
Item
Specification
Model type
CMF68L-DIN
Capacity [20HR/5HR] (AH)
68 / 54
Cold Cranking Amperage (A)
600
Reserve Capacity (Min)
110
Specific Gravity
1.25 - 1.31 [25°C (77°F)]
Voltage (V)
12

▷ AGM70L-DIN
Item
Specification
Model type
AGM70L-DIN
Capacity [20HR/5HR] (AH)
70 / 56
Cold Cranking Amperage (A)
760 (SAE) / 760 (EN)
Reserve Capacity (Min)
120
Specific Gravity
1.30 ~ 1.32 [25°C (77°F)]
Voltage (V)
12

  
Model type description

Cold Cranking Ampere (CCA) : A rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.
The maximum current that a fully charged battery can deliver at -18°C (-0.4°F) for 30 seconds while maintaining a voltage of at least 7.2 volts for a 12-volt battery.
The higher the CCA rating, the greater the starting power of the battery.
RESERVE CAPACITY (RC) : A battery industry rating that defines the battery's ability to power a vehicle with an inoperative alternator or fan belt.
The rating is the number of minutes a battery at 26.7°C (80°F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.
The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.
  
[BCI Type]
Capacity
(5HR/20HR)
Length
Width
Height
Total Height
L (mm)
W (mm)
T (mm)
TH (mm)
28/35
188 - 192
126 - 130
198 - 202
218 - 222
32/40
194 - 198
133 - 137
199 - 203
223 - 227
36/45
203 - 207
173 - 177
200 - 204
221 - 225
44/55
213 - 217
173 - 177
198 - 202
218 - 222
48/60
228 - 232
173 - 177
200 - 204
221 - 225
54/68
258 - 262
173 - 177
198 - 202
220 - 224
56/70
258 - 262
173 - 177
198 - 202
223 - 227
64/80
274 - 278
170 - 174
198 - 202
221 - 225
70/88
349 - 353
172 - 176
186 - 200
183 - 187
72/90
300 - 304
170 - 174
200 - 204
221 - 225
76/95
294 - 298
172 - 176
198 - 202
220 - 224
80/100
326 - 330
170 - 174
203 - 207
225 - 229

[DIN Type]
Capacity
(5HR/20HR)
Length
Width
Height
Total Height
L (mm)
W (mm)
T (mm)
TH (mm)
36/45
205 - 207
173 - 175
164 - 168
188 - 190
48/60
205 - 207
173 - 175
164 - 168
188 - 190
54/68
205 - 207
173 - 175
164 - 168
188 - 190
64/80
205 - 207
173 - 175
164 - 168
188 - 190
72/90
205 - 207
173 - 175
164 - 168
188 - 190
80/100
205 - 207
173 - 175
164 - 168
188 - 190
88/110
205 - 207
173 - 175
164 - 168
188 - 190

[AGM DIN Type]
Capacity
(5HR/20HR)
Length
Width
Height
Total Height
L (mm)
W (mm)
T (mm)
TH (mm)
40/50
205 - 207
173 - 175
164 - 168
188 - 190
48/60
227 - 229
173 - 175
164 - 168
188 - 190
56/70
276 - 278
173 - 175
164 - 168
188 - 190
64/80
312 - 314
173 - 175
164 - 168
188 - 190
72/90
351 - 353
173 - 175
164 - 168
188 - 190
84/105
392 - 394
173 - 175
164 - 168
188 - 190

Starting System
Starter
Item
Specification
Rated voltage
12V, 1.2 kW
The number of pinion teeth
11
Performance
Ampere
Max. 80 A
[No-load, 11.0V]
Speed
Min. 3,100 RPM

Charging System
Description and operation Description The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, ...

See also:

Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. As explained earlier in this section, several procedures ...

Rear Stabilizer Bar. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...

Repair procedures
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the front door trim. 2. Remove the front door window glass mounting hole ...